Effect of the particle size range of construction and demolition waste on the fresh and hardened-state properties of fly ash-based geopolymer mortars with total replacement of sand
authors De Rossi, A; Ribeiro, MJ; Labrincha, JA; Novais, RM; Hotza, D; Moreira, RFPM
nationality International
journal PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
author keywords CDW; Fine aggregates; Geopolymer mortars
keywords CONCRETE; CEMENT; PERFORMANCE; AGGREGATE; STRENGTH
abstract This study seeks the valorization of industrial residues (fly ash and construction and demolition waste (CDW)) through the production of geopolymer mortars. The effect of the sand substitution by CDW and the influence of the particle size range of CDW fine aggregates on the fresh and hardened properties of the mortars were evaluated. Geopolymer mortars were produced using biomass fly ash waste and metakaolin as a binder, CDW as fine aggregates, and an alkali solution of sodium silicate and sodium hydroxide as activator. The geopolymer mortars were characterized in fresh state by the flow table test and in the hardened state through chemical, physical/microstructural analyzes. The mortars produced with CDW showed lower flowability when compared to the ones prepared with sand. The compressive and flexural strength of hardened mortars, respectively, obtained with residues were higher when compared to sand: 40 MPa and 8.5 MPa with CDW, against 23 MPa and 3.1 MPa for sand-based samples. It was observed that mortars developed with recycled aggregate and natural aggregate present similar chemical and mineralogical compositions. The superior results obtained in the mechanical properties of mortars produced with CDW are related to the recycled aggregate-geopolymer paste interface. (C) 2019 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
publisher ELSEVIER
issn 0957-5820
isbn 1744-3598
year published 2019
volume 129
beginning page 130
ending page 137
digital object identifier (doi) 10.1016/j.psep.2019.06.026
web of science category Engineering, Environmental; Engineering, Chemical
subject category Engineering
unique article identifier WOS:000482213900014
  ciceco authors
  impact metrics
journal analysis (jcr 2019):
journal impact factor 4.966
5 year journal impact factor 4.708
category normalized journal impact factor percentile 80.34
dimensions (citation analysis):
altmetrics (social interaction):



 


Sponsors

1suponsers_list_ciceco.jpg