Production and characterisation of glass ceramic foams from recycled raw materials
authors Fernandes, HR; Tulyaganov, DU; Ferreira, JMF
nationality International
journal ADVANCES IN APPLIED CERAMICS
author keywords Glass foams; Industrial wastes; Silicon carbide; Recycling
keywords WASTE; ASH
abstract Glass foams were produced exclusively from industrial residues, namely from sheet glass cullet and fly ashes from thermal power plant as the main components, and from burned wastes of silicon carbide (SiC) abrasive papers. The experimental results showed that homogenous microstructures of large pores could be obtained by adding an optimum amount (1 wt-%) of a commercial SiC powder (SiCC) after sintering at 950 degrees C. The SiCC was then replaced by equivalent amounts of SiC abrasive paper ashes of different grain sizes. The SiC containing foams led to apparent density and compressive strength values of about 0.18-0.35 g cm(-3) and 0.9-1.8 MPa. Good correlations between compressive strength, apparent density and microstructure (pore size, strut thickness and internal porosity) were observed.
publisher TAYLOR & FRANCIS LTD
issn 1743-6753
year published 2009
volume 108
issue 1
beginning page 9
ending page 13
digital object identifier (doi) 10.1179/174367509X344971
web of science category Materials Science, Ceramics
subject category Materials Science
unique article identifier WOS:000263606900003
  ciceco authors
  impact metrics
journal analysis (jcr 2017):
journal impact factor 1.092
5 year journal impact factor 1.092
category normalized journal impact factor percentile 61.111
dimensions (citation analysis):
altmetrics (social interaction):



 


Sponsors

1suponsers_list_ciceco.jpg