Tailored thin plasma polymers for surface engineering of coil coated steel
tipo de financiamento European Comission
programa ECSC-STEEL C
acrónimo/
referência
ECSC CONTRACT 7210-PR-383 CECA
referência alternative 7210-PR/383
grupo(s) de investigação 3 - materiais de carbono, compósitos e revestimentos funcionais;
departamento Materials and Ceramic Engineering (DEMaC)
período de execução 2002-07-01 - 2005-06-30 ( 36 Meses )
resumo/
palavras-chave

The project shall investigate the application of thin plasma polymer films with tailored properties for surface engineering of coil-coated steel. The aim is to achieve scratch resistance, anti-finger print and easy-to-clean properties. Moreover, the adhesion to the polymer coating and the weathering stability will be optimised. Two coil-coating products will be used as technical substrate (polyester and polyurethane top coat). Most probably, the surfaces of these coatings have to be plasma activated prior to plasma polymer deposition to achieve good adhesion. Variation of this pre-treatment process in combination with the corresponding surface analysis will be performed. Plasma polymers will be deposited by means of three different reactor systems (hollow cathode, capacitive discharge rf plasma, microwave). The deposited plasma polymers will be studied in detail by advanced surface analysis and microscopy. Testing is done with regard to chemical resistance, adhesion, weathering resistance and aesthetic properties.

coordenador
/ip local
Mário Guerreiro Silva Ferreira
ciceco status Parceiro
instituição proponente MAX-PLANCK-INSTITUT FÜR EISENFORSCHUNG Germany
instituições participante(s)

CENTRO SVILUPPO MATERIALI SPA
Italy
CORUS UK LIMITED
United Kingdom
THYSSEN KRUPP STAHL
Germany
UNIVERSIDADE DE AVEIRO
Portugal
VOESTALPINE STAHL GMBH
Austria

parceiro(s) internacional Sim
orçamento total 1.507.480€
orçamento ciceco 15.004€
centro de custos 3.50.74
link http://cordis.europa.eu/project/rcn/66642_en.html
publicações
Apoio

1suponsers_list_ciceco.jpg