http://www.researcherid.com/rid/H-3640-2013
Graduated in Ceramics and Glass Engineering (1988) in Aveiro University (UA). In 1992 got a M.Sc. in Materials and Science Engineering from the same University. From 1992 to 1997 worked, as executive, in the Vitricer/Fritta company (supplier of enamels, serigraphic inks, etc, for ceramic companies) and then (1997-2000) was responsible for the R&D Department of Revigrés (wall and floor tiles ceramic factory). In 2000 started her Ph.D. at UA on dielectric materials for microwave applications and after that took a Post-Doctoral position working in the development and characterization of rehabilitation mortars. Since 2008 is researcher at CICECO.
|
Development and industrial implementation of new materials, namely, inorganic pigments, products with new surface functionalities and porous ceramics.
Recycling - Development of inorganic pigments, clinker and geopolymers from industrial wastes, promoting, in some cases, the inertization of hazardous materials.
Photocatalysis - Deposition and study of photocatalytic (aqueous and gaseous decontamination, self-cleaning and antibacterial) layers based on TiO2.
Mortars – Formulation and testing of aerial lime based mortars having new functionalities.
Traditional ceramic materials – Development and optimization of porous ceramic wall and floor tiles.
|
[1] Compositional and chromatic properties of strontium hexaferrite as pigment for ceramic bodies and alternative synthesis from wiredrawing sludge,W Hajjaji, RC Pullar, C Zanelli, MP Seabra, M Dondi, JA Labrincha, Dyes Pigm., 96 [3] 659-664, 2013.
[2] Titanium dioxide modified with transition metals and rare earth elements: Phase composition, optical properties, and photocatalytic activity, DM Tobaldi, A Sever Škapin, RC Pullar, MP Seabra, JA Labrincha, Ceram. Int., 39 [3] 2619-2629, 2013.
[3] Sol-gel synthesis, characterisation and photocatalytic activity of pure, W-, Ag- and W/Ag co-doped TiO2 nanopowders, DM Tobaldi, RC Pullar, AF Gualtieri, MP Seabra, JA Labrincha, Chem. Eng. J., 214 [1] 364-375, 2013.
[4] Photodegradation of Orange II solutions by TiO2 active layers jet sprayed on aluminium sheets, MP Seabra, E Rego, A Ribeiro, JA Labrincha, Chem. Eng. J., 171 [1] 175-180, 2011.
[5] Ceramic tiles for photodegradation of Orange II solutions, MP Seabra, RR Pires, JA Labrincha, Chem. Eng. J. 171 [2] 692-702, 2011.
[6] Evaluation of metal-ions containing sludges in the preparation of black inorganic pigments, W Hajjaji, MP Seabra, JA Labrincha, J. Hazard. Mater., 185, 619-625, 2011.
[7] Raman Spectroscopy of CaTiO3-based Perovskite Solid Solutions, H Zheng, IM Reaney, GDCC Gyorgyfalva, R Ubic, J Yarwood, MP Seabra, VM Ferreira, J. Mat. Res., 19 [2] 488-495, 2004.
[8] Structure and Microwave Dielectric Properties of La(Mg0.5Ti0.5)O3–CaTiO3 System, MP Seabra , M Avdeev, VM Ferreira, RC Pullar, N Alford, J. Eur. Ceram. Soc, 23 [14] 2403-2408, 2003.
[9] Synthesis of La(Mg0.5Ti0.5)O3 Ceramics for Microwave Applications, MP Seabra, VM Ferreira, Mat. Res. Bull., 37 [2] 255-259, 2002.
[10] Dielectric Properties of the (1-x)La(Mg0.5Ti0.5)O3 – xSrTiO3 Ceramics, MP Seabra, AN Salak, VM Ferreira, LG Vieira, JL Ribeiro, J. Eur. Ceram. Soc., 24 [10-11] 2955-3002, 2004.
Patent MP Seabra, LC Grave, JA Labrincha, “Processo de obtenção de grés porcelânico com acção anti-microbiana”, PN 105240, 06/08/2010.
|
Invited professor of Materials and Ceramic Engineering Department, University of Aveiro, 3º year of DESIGN of the following subjects: • Materials and Technologies I (practical classes) - 2004/05 and 2011/12. • Materials and Technologies II (theoretical and practical classes) - 2003/07 and 2009/10.
Ph.D. Thesis
“Geopolimerização de resíduos industriais para a obtenção de estruturas leves”, LH Buruberri, Ph.D. in Materials Science and Engineering (UA), in progress.
"Tecnologias de melhoria de compatibilização das cinzas das caldeiras de biomassa com aplicações em cimento e argamassas", MN Capela, Ph.D. in Biorefinery (UA), in progress.
M.Sc. Thesis
"Estudo dos factores que influenciam a qualidade da impressão digital no grés porcelânico" G Santos, M.Sc. in Materials Engineering (UA), in progress.
“Formulação de pasta reciclada corada a partir de resíduos da produção cerâmica e de outros setores industriais”, L Vasconcelos, M.Sc. in Materials Engineering (UA), in collaboration with GRESTEL, 2018.
“Application of geopolymers as pH buffering materials in anaerobic processes treating organic waste”, CL Correia, M.Sc. in Environmental Engineering (UA), 2018.
"Síntese e caracterização de vidros antimicrobianos pelo método de sol-gel" D Gomes, M.Sc. in Materials and Biomedical Devices (UA), 2015.
"Vidros e vitrocerâmicos biativos e antibacterianos dopados com prata" M Capela, M.Sc. in Materials and Biomedical Decives (UA), 2015.
"Desenvolvimento de geopolímeros a partir de resíduos da indústria de celulose" O Goncalves; M.Sc. in Materials Engineering (UA), in collaboration with RAIZ (Instituto de Investigação da Floresta e Papel)/PORTUCEL SOPORCEL group, 2014.
“Estudo da adaptação de lamas geradas no processo de produção de pasta de papel pelo processo Kraft para reciclagem em produtos cerâmicos” L Buruberri; M.Sc. in Materials Engineering (UA), in collaboration with RAIZ (Instituto de Investigação da Floresta e Papel)/PORTUCEL SOPORCEL group, 2014.
“Lacagem de camadas TiO2 com ação fotocatalítica”, A Cação; M.Sc. in Materials Engineering (UA), 2013.
“Preparação e estudo da actividade fotocatalítica de titânia pura e dopada”, ARS Pereira: M.Sc. in Environmental Engineering (UTAD), 2013.
“Actividade fotocatalítica de camadas de TiO2 otimizadas”, JPG Tarelho: M.Sc. in Materials Engineering (UA), 2011.
“Optimização industrial de revestimentos cerâmicos com propriedades fotocatalíticas”, RR Pires: M.Sc. in Materials Engineering (UA), in collaboration with REVIGRÉS, 2010.
“Porcelanato extrudido com acção antimicrobiana, antimancha e resistente quimicamente”, LCS Grave: M.Sc. in Ceramics and Glass Engineering (UA), in collaboration with KERATEC - Aleluia Cerâmicas S.A. group, 2010.
“Fundição Injectada sob Pressão”, PMA Silva: M.Sc. in Materials Engineering (UA), held at TUPAI – Fábrica de Acessórios Industriais S.A., 2009.
|
João Labrincha (Professor), Robert Pullar (Researcher), Leire Buriberri and Marinélia Capela (PhD students), Manfredi Saeli, Jorge Carneiro and David Tobaldi (Pos-docs), Ana Caetano, Mariana Silva, Mirtha Lourenço and João Carvalheiras (Fellows).
|
Portugueses
Aveiro - João Labrincha, Robert Pullar, Maria Helena Fernandes, Paula Ferreira, Isabel Capela, Luís Tarelho, Luís Carlos, Rute Ferreira.
Viana do Castelo – Manuel Ribeiro.
Michelle Dondi and Chiara Zanelli (CNR-ISTEC, Italy) Dachamir Hotza (UFSC, Brasil) Geoffrey Allen, Martin Ansell, Richard Ball and Pete Walker (University of Bath, UK) Graham Ormondroyd (Bangor University, UK)
|
|
Development of Coloured Stoneware Bodies through the Incorporation of Industrial Cr/Ni Electroplating SludgeVilarinho, IS; Carneiro, J; Pinto, C; Labrincha, JA; Seabra, MP 2021, SUSTAINABILITY, 13, 4,
|
Waste-Based One-Part Alkali Activated MaterialsGoncalves, M; Vilarinho, IS; Capela, M; Caetano, A; Novais, RM; Labrincha, JA; Seabra, MP 2021, MATERIALS, 14, 11,
|
Development of a Commercial Screed Mortar with Low OPC Content by Incorporation of Biomass Fly AshCapela, MN; Tobaldi, DM; Tarelho, LAC; Seabra, MP; Labrincha, JA 2021, APPLIED SCIENCES-BASEL, 11, 20,
|
A New Added-Value Application for Steel Wire Drawing Mill Scale Waste in Stoneware Ceramic ProductsVilarinho, IS; Lopes, AL; Carneiro, J; Pinto, C; Labrincha, JA; Seabra, MP 2021, METALS, 11, 4,
|
Immobilization of Hazardous Wastes on One-Part Blast Furnace Slag-Based GeopolymersPaz-Gomez, DC; Vilarinho, IS; Perez-Moreno, SM; Carvalheiras, J; Guerrero, JL; Novais, RM; Seabra, MP; Rios, G; Bolivar, JP; Labrincha, JA 2021, SUSTAINABILITY, 13, 23,
|
Role of waste-based geopolymer spheres addition for pH control and efficiency enhancement of anaerobic digestion processGameiro, T; Novais, RM; Correia, CL; Carvalheiras, J; Seabra, MP; Tarelho, LAC; Labrincha, JA; Capela, I 2021, BIOPROCESS AND BIOSYSTEMS ENGINEERING, 44, 6, 1167-1183.
|
Graphene-TiO2 hybrids for photocatalytic aided removal of VOCs and nitrogen oxides from outdoor environmentTobaldi, DM; Dvoranova, D; Lajaunie, L; Rozman, N; Figueiredo, B; Seabra, MP; Skapin, AS; Calvino, JJ; Brezova, V; Labrincha, JA 2021, CHEMICAL ENGINEERING JOURNAL, 405,
|
CuxO and carbon-modified TiO2-based hybrid materials for photocatalytically assisted H-2 generationTobaldi, DM; Koci, K; Edelmannova, M; Lajaunie, L; Figueiredo, B; Calvino, JJ; Seabra, MP; Labrincha, JA 2021, MATERIALS TODAY ENERGY, 19,
|
Carbon-modified titanium oxide materials for photocatalytic water and air decontaminationSilva, MRF; Lourenco, MAO; Tobaldi, DM; da Silva, CF; Seabra, MP; Ferreira, P 2020, CHEMICAL ENGINEERING JOURNAL, 387,
|
Multifunctional cork - alkali-activated fly ash composites: A sustainable material to enhance buildings' energy and acoustic performanceNovais, RM; Carvalheiras, J; Senff, L; Lacasta, AM; Cantalapiedra, IR; Giro-Paloma, J; Seabra, MP; Labrincha, JA 2020, ENERGY AND BUILDINGS, 210,
|
Synthesis of red mud derived M-type barium hexaferrites with tuneable coercivityCarvalheiras, J; Novais, RM; Mohseni, F; Amaral, JS; Seabra, MP; Labrincha, JA; Pullar, RC 2020, CERAMICS INTERNATIONAL, 46, 5, 5757-5764.
|
Effect of Al anodizing waste on the final properties of porous geopolymersBuruberri, LH; Senff, L; Seabra, MP; Labrincha, JA 2020, CONSTRUCTION AND BUILDING MATERIALS, 263,
|
Cooperative and fully reversible color switching activation in hybrid graphene decorated nanocages and copper-TiO2 nanoparticlesTobaldi, DM; Lajaunie, L; Dvoranova, D; Brezova, V; Figueiredo, B; Seabra, MP; Calvino, JJ; Labrincha, JA 2020, MATERIALS TODAY ENERGY, 17,
|
Synergy of Neodymium and Copper for Fast and Reversible Visible-light Promoted Photochromism, and Photocatalysis, in Cu/Nd-TiO2 NanoparticlesTobaldi, DM; Lajaunie, L; Haro, ML; Ferreira, RAS; Leoni, M; Seabra, MP; Calvino, JJ; Carlos, LD; Labrincha, JA 2019, ACS APPLIED ENERGY MATERIALS, 2, 5, 3237-3252.
|
Evaluation of reactive Si and Al amounts in various geopolymer precursors by a simple methodBuruberri, LH; Tobaldi, DM; Caetano, A; Seabra, MP; Labrincha, JA 2019, JOURNAL OF BUILDING ENGINEERING, 22, 48-55.
|
|
|
|