Effect of Test Rate on Adhesion Properties of SMR L, ENR-25 and ENR-50-based Pressure-Sensitive Adhesives


The dependence of loop tack, peel strength and shear strength of SMR L and Epoxidized Natural Rubber (ENR-25 and ENR-50)-based pressure sensitive adhesives on the rate of testing was investigated using coumarone-indene as the tackifying resin. Toluene and poly(ethylene terephthalate) (PET) were used as the solvent and substrate respectively throughout the study. A SHEEN hand coater was used to coat the adhesive on the substrate. All adhesion properties were determined with a Llyod Adhesion Tester operating at different rates of testing. Results show that loop tack, peel strength and shear strength all increase with increase in rate of testing, an observation which is attributed to the viscoelastic response of the adhesive which results in cohesive and adhesion failures at low and high test rates, respectively. Except for shear strength, the other adhesion properties increase with adhesive coating thickness. ENR-25-based adhesive consistently exhibits higher value compared to ENR-50 and SMR L. For shear strength, the largest value measured is for ENR-50 adhesive system. (C) Koninklijke Brill NV, Leiden, 2012




Engineering; Materials Science; Mechanics


Poh, BT; Khan, I

nossos autores



The authors acknowledge the research grant from Fundamental Research Grant Scheme (FRGS) provided by the Universiti Sains Malaysia that has resulted in this article.

Partilhe este projeto

Publicações similares

Usamos cookies para atividades de marketing e para lhe oferecer uma melhor experiência de navegação. Ao clicar em “Aceitar Cookies” você concorda com nossa política de cookies. Leia sobre como usamos cookies clicando em "Política de Privacidade e Cookies".