Functionalization of mortars for controlling the indoor ambient of buildings

resumo

This paper reports on the use of nanoparticles of titania (nT), superabsorbent polymer (SA) and phase-change material (PCM) in order to obtain the functionalization of mortars. Single, binary and ternary mixtures with 0-1 wt.% nT, 0-1 wt.% SA, 0-20 wt.% PCM were based on flow table measurements (similar to 140 mm) to estimate the individual and interactive effect between the additives. In general, the mentioned additives showed distinct behaviors, but the PCM particles predominate on most of properties and also on the performance of others additives. SA particles exhibited quite different rheological behavior if compared with other additions, due to high affinity with the water and stronger absorption levels. The PCM-containing mortars attenuate and delayed the temperature changes, while 1SA particles resulted in higher hygroscopic capacity. Moreover, the photocatalytic degradation of NOx reached 40-45%. In addition, the moisture buffering value of 1SA, 1nT and 20PCM mortars were classified as good according to the Nordtest method. (C) 2013 Elsevier B.V. All rights reserved.

palavras-chave

HARDENED STATE; NANOPARTICLES

categoria

Construction & Building Technology; Energy & Fuels; Engineering

autores

Vieira, J; Senff, L; Goncalves, H; Silva, L; Ferreira, VM; Labrincha, JA

nossos autores

Partilhe este projeto

Publicações similares

Usamos cookies para atividades de marketing e para lhe oferecer uma melhor experiência de navegação. Ao clicar em “Aceitar Cookies” você concorda com nossa política de cookies. Leia sobre como usamos cookies clicando em "Política de Privacidade e Cookies".