resumo
Silica gels synthesized from Tunisian sands employed as alternative low-cost adsorbents, and silica gel/TiO2 composites for combined absorption/photocatalytic decoloration of methylene blue (MB) dye solutions, were studied. The silica gel is characterized by a high specific surface area of up to 194 m(2)/g and is likely to increase in aqueous solution, according to the solid/liquid ratio which modulates the degree of hydration. This was determined at various synthesis pH values. For this silica gel, the maximum adsorption capacity (up to 91%, 125 mg/g) was obtained in acidic medium (pH 3). The adsorption mechanism fitted better using the Langmuir model, and the adsorption kinetics of the dye on these materials was well described by the second-order model. Silica gel/TiO2 demonstrated an effective degradation of MB the first stage (30 min without UV-light exposure) and under UV. The kinetics of discoloration of MB followed a pseudo-first-order rate law. We can remark that 5 h of UV irradiation was enough to achieve 99% discoloration of the MB. The findings demonstrated the applicability of this silica gel/TiO2 catalyst for the photocatalytic oxidation of MB.
palavras-chave
AQUEOUS-SOLUTIONS; HETEROGENEOUS PHOTOCATALYSIS; TEXTILE DYE; REMOVAL; DEGRADATION; PHOTODEGRADATION; KINETICS; MATRIX; CARBON; WATER
categoria
Engineering; Water Resources
autores
Lazaar, K; Hajjaji, W; Pullar, RC; Chargui, H; Moussi, B; Labrincha, J; Rocha, F; Jamoussi, F
nossos autores
João António Labrincha Baptista
Professor Catedrático
Rob Pullar
Colaborador
Walid Hajjaji
Bolseiro de pós-Doutoramentoagradecimentos
This work was supported by FCT grant SFRH/BPD/72398/2010 and by UID/GEO/04035/2013 project. This study was supported by funding from MEDYNA: FP7-Marie Curie Action funded under Grant Agreement PIRSES-GA-2013-612572, and the Tunisian Belgium Wallonie-Bruxelles International WBI Research Project Valorisation des Argiles tunisiennes. Robert C. Pullar acknowledges the support of the Fundacao para a Ciencia e Tecnologia (FCT) grant IF/00681/2015, and this work was developed within the scope of the FCT project CICECO-Aveiro Institute of Materials (FCT UID/CTM/50011/2019), financed by national funds through the FCT/MCTES.