resumo
Vickers indentation (IF) and single-edge-V-notched beam (SEVNB), to measure the fracture toughness (K-IC) of zirconia-based dental ceramics and mathematical models were proposed to establish a correlation between both. Zirconia (ZrO2) stabilized with 3 mol. % of Y2O3 (3Y-TZP) and 5 mol% of Y2O3 (5Y-PSZ) were compacted (n = 42) and sintered for 2 h at different temperatures (1475 degrees C, 1500 degrees C, 1550 degrees C, or 1600 degrees C). After sintering, they were characterized by relative density using the ASTM C373-88 standard, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The average grain size was measured according to the ASTM E1382-97 standard. The fracture toughness (K-IC) was determined using two methods: Vickers indentation fracture toughness (KIC-IF): method based on mathematical modeling that considers the parameters used for the Vickers hardness test and Fracture toughness by the single-edge-V-notch-beam (KIC-SEVNB): method proposed by ISO 23146:08. The main phases of the 3Y-TZP and 5Y-PSZ ceramics were ZrO2-tetragonal and ZrO2-cubic, respectively. The 3Y-TZP specimens showed equiaxed grains with average grain sizes ranging from 0.55 to 0.79 mu m. The grain sizes of 5Y-PSZ of specimens sintered at 1475 degrees C and 1600 degrees C were 0.62 and 2.32 mu m, respectively. For all ceramics the crack size ratio was c/a < 2.5, suggesting a Palmqvist-type crack system. The fracture toughness measured by the Vickers indentation method (KIC-IF) and by the SEVNB method (KIC-SEVNB) was the same when the experimental data were fit to a mathematical model.
palavras-chave
MICROSTRUCTURE-DEVELOPMENT MECHANISM; Y-TZP CERAMICS; TETRAGONAL ZIRCONIA; GRAIN-SIZE; TRANSFORMATION BEHAVIOR; DIFFRACTION; CRACK; TEMPERATURE; STRENGTH; HARDNESS
categoria
Engineering; Materials Science
autores
Alves, MFRP; dos Santos, C; Elias, CN; Amarante, JEV; Ribeiro, S
nossos autores
Manuel Fellipe Rodrigues Pais Alves
Estudante de doutoramentoagradecimentos
Conselho Nacional de Desenvolvimento Cientiacutefico e Tecnoloacutegico, Grant/Award Numbers: 132136/2018-0, 311119/2017-4; Fundacedilatildeo Carlos Chagas Filho de Amparo agrave Pesquisa do Estado do Rio de Janeiro, Grant/Award Numbers: E-26/010.101.233/2018, E-26/202.997/2017; CNPq, Grant/Award Number: 311119/2017-4 132136/2018-0; FAPERJ, Grant/Award Number: E-26/202.997/2017 E-26/010.101.233/2018