resumo
Polycrystalline cubic boron nitride (PcBN) is the designation given to composites constituted by cBN hard particles within a ceramic/metallic matrix. These composites are normally processed in severe pressure and temperature conditions to achieve full densification and prevent hexagonal BN formation, which would decrease the composite hardness. In this work, the Spark Plasma Sintering (SPS) technique was investigated as an alternative to sinter cBN-TiCN based composites, with and without addition of metallic Ni. The initial compo-sitions were selected according with calculated phase diagrams, using the Thermo-calc software. The thermal behavior during SPS was studied up to 2000 & DEG;C, namely the densification, reactivity and phase transformations. A larger densification was achieved with Ni addition, but full removal of open porosity was only possible at 1700 & DEG;C, where the cBN phase transformation to hBN completely occurred. In agreement with the thermodynamic calculations, other matrix phases, as TiB2 and Ni3B, were formed during sintering.
palavras-chave
CUBIC BORON-NITRIDE; MECHANICAL-PROPERTIES; PHASE-DIAGRAM; COMPOSITES; TRANSFORMATIONS; MICROSTRUCTURE; DIAMOND; TIN; AL
categoria
Materials Science
autores
Mineiro, R; Fernandes, CM; Silva, EL; Soares, MR; Figueiredo, D; Ferrari, B; Sanchez-Herencia, AJ; Senos, AMR
nossos autores
Grupos
G2 - Materiais Fotónicos, Eletrónicos e Magnéticos
G3 - Materiais Eletroquímicos, Interfaces e Revestimentos
Projectos
Manufatura aditiva de compósitos de base cerâmica para componentes mecânicos (3DCompCer)
CICECO - Aveiro Institute of Materials (UIDB/50011/2020)
CICECO - Aveiro Institute of Materials (UIDP/50011/2020)
Associated Laboratory CICECO-Aveiro Institute of Materials (LA/P/0006/2020)
agradecimentos
This research is sponsored by FEDER funds through COMPETE, Programa Operacional Factores de Competividade, 3DCompcer (POCI-01-0247-FEDER-047060). The authors are grateful to the JECS Trust for funding this work between the Department of Materials and Ceramic Engineering, University of Aveiro (Portugal), and the Institute of Ceramic and Glass (ICV-CSIC) (Spain) (Contract No. 2020257). This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 & amp; LA/P/0006/2020, financed by national funds through the FCT/MCTES (PID-DAC) and also within PID2019-106631GB-C42 of the Spanish Government.