José Carlos Almeida (born 1964) is a researcher at CICECO-Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, Portugal. José Carlos is José Carlos is now President of the Portuguese Ceramic and Glass Society, and was its Secretary from 2014 to 2020. He was also member of the Permanent Executive Committee of the European Ceramic Society from July 2017 to September 2021, and is now Chair of the ECerS's R&D Working Group. He is now working in the FCT Project MULBIOIMPLANT - development of a multifunctional and bio-inspired implant to improve bone integration. He was CEO and owner of two companies between 1990 and 2010, having gained experience in various management areas. In 2008 José Carlos did a MSC in Science and Materials Engineering. at University of Aveiro. In 2011 he started a Doctoral Program in the same scientific area after receiving a grant from the FCT (Portuguese Science and Technology Foundation), having finished in January 2016. For him, it was a return to scientific research, interrupted in 1990 due to family reasons. That year he was attending a PhD in the field of materials science in a Brite/Euram Program project on silicon carbide reinforced silicon nitride composites. After obtaining the doctoral degree, the research work began as fellow postdoc in the project - Co-operation nº 3485 - DecorGlass - Decoration Techniques for the Glass, a Research & Development project promoted by Vista Alegre Atlantis (VAA) and the University Aveiro (UA), whose general objective is to develop a new range of glass products with high added value through study / development of new techniques and decoration materials. In this project it has been possible to apply satisfactorily the knowledge acquired about sol-gel processing and hybrid materials in a technological and industrial context. At the same time, it was possible to initiate a participation as researcher in the project "Hybrid organic-inorganic borosilicate materials by sol-gel for bone tissue engineering" that stems from an Integrated Action Portugal-Germany. A group of the CICECO-Aveiro Institute of Materials, University of Aveiro, and the group of Professor Aldo Boccaccini of the Institute for Biomaterials, Department of Materials Science and Engineering, University of Erlangen-Nuremberg, Germany. A partnership was started with a PhD student of the Department of Industrial Systems Engineering and Design, Universitat Jaume I., Castellon, Spain, working in the Biotechnology, Organometallic Chemistry and Materials Chemistry Group. The student developed potential bioactive hybrid coatings for titanium and steel dental implants. From 2017 to now, he co-supervised six MsC students of the Department of Materials and Ceramic Engineering, University of Aveiro. He is author of 12 scientific papers, some of them in collaboration with other Portuguese and foreigner research groups. He has collaborated as a reviewer with the following scientific journals: Materials Letters, Materials Science and Engineering C, Cerâmica, Materials, Ceramics International, Materials Chemistry and Physics, and Journal of Inorganic and Organometallic Polymers and Materials. ORCID Id: 0000-0003-1552-9532 SCOPUS Id: 56924482000
|
|
Cellular Response to Sol–Gel Hybrid Materials Releasing Boron and Calcium IonsSoraia Alexandra Ramos Coelho, Jose Carlos Almeida, Irem Unalan, Rainer Detsch, Isabel Margarida Miranda Salvado, Aldo R. Boccaccini, Maria Helena Vaz Fernandes 2021,
|
Cellular Response to Sol-Gel Hybrid Materials Releasing Boron and Calcium IonsCoelho, SAR; Almeida, JC; Unalan, I; Detsch, R; Salvado, IMM; Boccaccini, AR; Fernandes, MHV 2021, ACS BIOMATERIALS SCIENCE & ENGINEERING, 7, 2, 491-506.
|
Red ruby glass from gold nanoparticles obtained by LASiS - a new approachAlmeida, JC; Davim, EJC; Salvado, IMM; Fernandes, MHV; Costa, FM; Rey-Garcia, F; Francisco, LM; Lopes, AB 2020, JOURNAL OF NON-CRYSTALLINE SOLIDS, 537,
|
Sol-gel coatings made using methyl-modified alkoxysilanes: The balance between protection and bioactivationRomero-Gavilan, F; Carlos-Almeida, J; Cerqueira, A; Gurruchaga, M; Goni, I; Miranda-Salvado, IM; Fernandes, MHV; Suay, J 2020, PROGRESS IN ORGANIC COATINGS, 147,
|
A biocompatible hybrid material with simultaneous calcium and strontium release capability for bone tissue repairAlmeida, JC; Wacha, A; Gomes, PS; Alves, LC; Fernandes, MHV; Salvado, IMM; Fernandes, MHR 2016, MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 62, 429-438.
|
PDMS-SiO2-TiO2-CaO hybrid materials - Cytocompatibility and nanoscale surface featuresAlmeida, JC; Wacha, A; Gomes, PS; Fernandes, MHR; Fernandes, MHV; Salvado, IMM 2016, MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 64, 74-86.
|
Evaluating structural and microstructural changes of PDMS-SiO2 hybrid materials after sterilization by gamma irradiationAlmeida, JC; Lancastre, J; Fernandes, MHV; Margaca, FMA; Ferreira, L; Salvado, IMM 2015, MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 48, 354-358.
|
PDMS-SiO2 hybrid materials - A new insight into the role of Ti and Zr as additivesAlmeida, JC; Wacha, A; Bota, A; Almasy, L; Fernandes, MHV; Margaca, FMA; Salvado, IMM 2015, POLYMER, 72, 40-51.
|
Calcium Phosphonate Frameworks for Treating Bone Tissue DisordersShi, FN; Almeida, JC; Helguero, LA; Fernandes, MHV; Knowles, JC; Rocha, J 2015, INORGANIC CHEMISTRY, 54, 20, 9929-9935.
|
Structural characterization of PDMS-TEOS-CaO-TiO2 hybrid materials obtained by sol-gelAlmeida, JC; Castro, AGB; Lancastre, JJH; Salvado, IMM; Margaca, FMA; Fernandes, MHV; Ferreira, LM; Casimiro, MH 2014, MATERIALS CHEMISTRY AND PHYSICS, 143, 2, 557-563.
|
A new approach to the preparation of PDMS-SiO2 based hybrids - A structural studyAlmeida, JC; Castro, AGB; Salvado, IMM; Margaca, FMA; Fernandes, MHV 2014, MATERIALS LETTERS, 128, 105-109.
|
A novel hybrid material with calcium and strontium release capabilityCastro, AGB; Almeida, JC; Salvado, IMM; Margaca, FMA; Fernandes, MHV 2012, MATERIALS LETTERS, 88, 12-15.
|
DISPERSION AND PACKING OF MIXTURES OF SI3N4 POWDERS WITH SIC WHISKERSALMEIDA, JCM; SACRAMENTO, JMG; CORREIA, RN; FONSECA, AT; BAPTISTA, JL 1989, FABRICATION TECHNOLOGY, 45, 179-186.
|
PRESSURELESS SINTERING OF SILICON-NITRIDE WITH ADDITIVES OF THE Y2O3-AL2O3-SIO2 SYSTEMALMEIDA, JC; FONSECA, AT; CORREIA, RN; BAPTISTA, JL 1989, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 109, 395-400.
|
|
|
|